Adjustable Angle Drill Attachment with 3/8-Inch Keyless Chuck

$36.60 USD
$52.00 USD
Quantity

The hole is right there.
Your drill won’t line up.

Inside a cabinet or beside a frame, a straightforward drilling job can turn into an awkward search for space.

Change the approach with an adjustable angle drill attachment. Position the chuck, lock the handle, and guide the bit into a spot your drill body makes difficult to reach.

Choose Your Pack

Product Introduction

🔧 Find a workable angle for the job. Rotate the two body sections to change the chuck’s orientation relative to your drill. That gives you more options when an obstruction limits your approach.

🪵 A useful addition for awkward woodworking tasks. Keep it with your drilling accessories for cabinet projects, furniture repairs, and remodeling work where access takes a little planning.

Key Features

  • 🔄 Two Independently Rotating Sections — Each body half rotates through 360° to help you find an approach that fits the available space.
  • 🔒 Twist to Lock the Position — Set the orientation and turn the handle to lock it. Reverse the handle when you need to reposition.
  • ⚙️ 3/8-Inch Keyless Chuck — Tighten a compatible bit by hand, with no separate chuck key to find between changes.
  • ✋ Soft-Grip Support Handle — The handle gives your supporting hand a place to hold and control the attachment during use.
  • 🧰 Fits a Compatible Existing Drill — The hex drive shaft fits drill chucks of 3/8 inch and larger, making it an accessory you can add to a suitable corded setup.

Product Specifications

Product Type Adjustable angle drill attachment
Construction Steel and plastic
Output Chuck 3/8 in (9.5 mm) keyless chuck
Drill Connection Hex shaft for drill chucks of 3/8 in and larger
Compatible Drill Corded power drill operated at 1,000 RPM or faster, following the product instructions
Suitable Bits Twist or spade bits up to 3/4 in (19.1 mm) cutting diameter, with a shank that fits the chuck
Pack Sizes 1, 2, 3, 4, or 5 attachments

Check your setup: Use within the specified drill and bit limits. Hole saws, auger bits, and bits larger than 3/4 inch are excluded from the intended use. Impact drivers are not recommended.

Package Contents

📦 Each unit includes one adjustable drill attachment with a keyless chuck and locking handle. Supply your own compatible drill and bits.

  • 1-Pack — 1 × Adjustable Angle Drill Attachment
  • 2-Pack — 2 × Adjustable Angle Drill Attachments
  • 3-Pack — 3 × Adjustable Angle Drill Attachments
  • 4-Pack — 4 × Adjustable Angle Drill Attachments
  • 5-Pack — 5 × Adjustable Angle Drill Attachments

Frequently Asked Questions

When is this attachment most useful?

Use it when an obstruction stops your drill body from lining up with the hole. Check that there’s room for the attachment, bit, and your supporting hand before starting.

How do I set the angle?

With the drill disconnected from power, unlock the handle and rotate the body sections to position the chuck. Twist the handle to secure the setting before drilling.

Which drill should I use?

The specified setup is a corded power drill operated at 1,000 RPM or faster, with a chuck that securely grips the attachment’s hex shaft. Follow both tools’ operating instructions.

How do the two bit sizes differ?

The 3/8-inch figure describes the chuck’s maximum bit-shank capacity. The 3/4-inch limit describes the maximum cutting diameter of a suitable twist or spade bit.

What comes in a multipack?

Each unit is a complete adjustable attachment with its chuck and handle. A 2-Pack includes two attachments, and a 5-Pack includes five.

Find a better approach to that awkward hole.

Check your drill compatibility, pick your pack, and add more positioning options to your tool kit.

Choose Your Pack